一、Specification 

Specification

IAS-I

Electronic Data	Voltage	Single phase,220V±10%
	Motor Rated Power	280W
	Rated Current	2.5A
	Control Voltage	24V,AC
	Protection Degree	IP55
	Emergency Protection	Manual chain,Small door in door
	Obstruction Detection	Only with this function after installed the safety edge.
Mechanical Data	Rated Output Shaft Turn	40.5N.m
	Rated Speed	66rpm
	Emergency Handle	Two chain for emergency operation.
	Brake	Three grades sprocket speed reduction.
	Drive Way	Belt speed reduction & five grade sprocket speed reduction
	Maximum Lifting Height	7m
	Door Operating Speed	140mm/S~200mm/S
	Travel Setting	Trimming limit mechanism
	Lift Way	Standard lift,Vertical lift,High lift etc.
	Noise	<53dB
Environmental Data	Size of Operator	L430mm* W440/150mm * H250mm
	Weight	32Kg
	Operating Temperature	-25℃~+60℃
	Installation Way	Side mount,two sprocket drive
	Frequency of Operning	≤25 time/hour or≤15 time/continuous open & close
	Applicable Area of Door	≤26㎡
	Size of mount	450mm
Accessories	Door-open Device	Remote control,IC card,Radar Sensor,Geomagnetism Sensor, Code lock,Switch etc.
	Detective Device	Sensing Edge, Radar Sensor,Geomagnetism Sensor, Photo Beam etc.
Intellectual Property	Patent	Multistage sprocket speed reduction;One chain clutch;Obstruction Detection.
Feature(IAS-II)	Sidemount operator,it requires at least width 130/260mm of one side of the wall.Shaft drive,two frames are not easy to shift,drive shaft is not easy to wear out;Quiet,easy installation.

 

 

 

二、Function

220V single phase,friction disc brake,motor protected efficiently,three speed reducing transmitting,output power strong,temperature control,saftly protection abundantly.

 

 

 三、Installation